(Items:0)

Dance Ice Gymnastics Sportswear

Size 14 Girls Clothing - Crop Tops

Page: 1

Item: 3073

Size: 14

$22.00

Item: 3147

Size: 14

$20.00

Item: 3234

Size: 14

$25.00

Item: 3247

Size: 14

$30.00

Page: 1

The warp beam holds the length-wise yarns and is located at the back of the loom. This beam is controlled so that it releases yarn to the loom as it is needed.The Heddles are wires or metal strips with an eye located in the center through which the warp ends are threaded. The harness is the frame that holds the Heddles in position. Each loom has atleast two harnessess. A majority of looms for regular fabrics have four to twelve harnessess and some looms may have as many as thirty-two. Harnessess can be raised or lowered to produce the shed through which the filling yarn is passed and thus controls the pattern of weave.The shuttle move back and forth in the shed created, passing the filling yarns between the warp yarns. The reed is a comb like device that helps to pack the filling yarns into position in the woven fabric.

3. Chain Stitch: This is done side by side to fill large shapes or can be used to work single lines. Work the stitches towards you starting from the top of the line. Bring the thread out to the right side of fabric. Insert needle in fabric at the same point, holding the thread down with your left thumb. Bring the needle point out a short distance ahead and pull it through, keeping the working thread under the needle. The result is a loop. In starting the next stitch remember to insert the needle just inside the loop.