k & l. Outer covering. To keep the paper edges from curling, the form should be shellacked and thoroughly dried. A top shirt is tightly and smoothly fitted over form, sewing where necessary, and taping at armscye, neck and under the lower edge of the form. Using � inch colored tape, mark the following measurement positions; centre front, center back, neck, shoulder width, back width, bust waist, Armscye, 3 inch hip, 6 inch hip, widest hip. (m) standard.

6. Faggoting: This trim is used between seams to give a decorative touch or to add the length or width of garment. To executive the design cut the yoke and the lower section of the blouse separately, with � seam allowances. Also cut the yoke pattern on heavy paper with one inch allowance. Fold under the allowance on edge of the yoke where faggoting is to be done and tack the folded edge to the prepared pattern. Now tack also the lower section of the blouse after folding in the seam allowance Then do the faggoting with zigzag stitches between foldings.