In garment industry these type of pattern will be helpful to cut bulk amount of garment in less time. 4. Graded paper pattern: Pattern of five consecutive sizes (for eg. 30, 32, 34, 35, 38 chest size) are marked in one single pattern. The required size according to the individual body measurement is traced separately, cut and used.

Paste another strip of tape closely below the widest hip. Paste stripe curving under each bust to preserve contour. c. First layer of strips, 12 to 15 inches. Begin at center front and back, paste moistened strips on the figure from neck and shoulder edges to taped waistline, over lapping strips � of the strip width. Let strips curve to body contour as they will, and f too long tear off excess length. Continue pasting strips to armscye edge, overlapping strips at top of shoulder. Repeat for second side of front and back. From waist to lower hip edge, paste 9 to 12 inch strips at right angles to waist, joining tape ends to those above the waist. Paste 5 to 9 inch strips diagonally from underarm to lower hip edge, allowing strips to overlap front and back. Repeat for second side.