7. Blanket stitch: This stitch is used as an edging for blanket and other articles or as part of a design for which the blanket stitch makes the border. It is also used in cut work and applique work. It is worked between a pair of lines (usually parallel). The work should be done from left to right, stitching towards you. Bring thread out on the lower line, insert needle in position on upper line and take a downward stitch with the thread under the needle point. Draw out the thread. Stitches may be of the same size at regular distances apart or grouped and spaced according to the effect desired. To make scalloped edge using blanket stitches, outline two rows of scallops with running stitch and work blanket stitches between the two rows. Trim fabric away close to scallops after the work is completed.

18. Belt: This is usually made out of leather, but a cloth Tape, Nylon wire or any other strong rope can also be used. 8.5 OPERATING THE MACHINE: Manufacturer usually supply an instruction manual with each sewing machine they sell. It is essential to read this book carefully and follow the instructions meticulously. When you are learning to treadle, run the machine with the presser foot up and the clutch on flywheel loosened so that the needle does not go up and down. Sit at a comfortable height in front of the machine and place one foot forward and the other foot sightly back on the treadle. Start the machine by turning the flywheel towards you. As the treadle begins to move, start pedaling slowly in such a way so as to continue this motion. Continue evenly, and gradually increase the speed. To stop the machine, place your hand on the flywheel and stop the motion of the feet. Practice to run the machine smoothly at correct speeds.