3. Winding the bobbin: Bobbins wind differently on the various machines, but generally the thread is first placed on a spool pin located below the flywheel and then drawn through the thread guide near the spool pin. Now with your hand wind the end of the thread on the bobbin in clockwise direction and place it on the winder. Turn the bobbin on the winder until the pin like projection Stitching along lines on the winder fits into the slot on the bobbin, thus holding bobbin in place. Then press the winding lever down until the rubber ring touches the hub of the flywheel and is held there.

5. Turn the pocket toward the front of the garment. Clip back seam allowances above and below pocket so that the seam allowances of the garment can be pressed open. Piping material would be effective. Buttons may be fixed in groups to create design interest gradually progressing in size from small to big.