Size L6 Girls Clothing - Long Sleeved Leotards
a. By mounting the drapes on a fitted section, in this case, the fitting section should be modeled first: b. By weights places inside the drapes c. By taping. Stage 6: Indicate all details: All the details should be indicated with pins rather than chalk and pins should follow the direction of any darts, tucks, seams etc., Stage 7: Remove from stand.
3. Winding the bobbin: Bobbins wind differently on the various machines, but generally the thread is first placed on a spool pin located below the flywheel and then drawn through the thread guide near the spool pin. Now with your hand wind the end of the thread on the bobbin in clockwise direction and place it on the winder. Turn the bobbin on the winder until the pin like projection Stitching along lines on the winder fits into the slot on the bobbin, thus holding bobbin in place. Then press the winding lever down until the rubber ring touches the hub of the flywheel and is held there.