(Items:0)

Dance Ice Gymnastics Sportswear

Size 10 Seconds - Leggings

Page: 1

Item: 2797

Size: 10

$5.00

Item: 2802

Size: 10

$5.00

Item: 2807

Size: 10

$5.00

Page: 1

10. Take care to use special layouts for asymmetric designs and for fabrics with bold designs, striped and checked designs, designs going in one direction and fabrics with nap and pile. Questions: PART I Objective questions: 1. Direction of the selvedge is (a) Lengthwise grain (b) widthwise grain (c) bias grain (d) None 2. A fabric that does not require pre shrinking is (a) cotton (b) rayon (c) wool (d) starched cotton 3. Straightening of fabric should be done (a) before stitching (b) after stitching (c) before cutting (d) after cutting 4. The details necessarily to be marked and cut are (a) fold lines (b) darts (c) seam lines (d) all the above 5. The fabric is not folded in (a) combination fold (b) open layout (c) lengthwise layout (d) None of the above 6. Lengthwise and crosswise fold is performed in (a) combination fold (b) off centre crosswise fold (c) lengthwise fold (d) open lay out 7. To prevent wastage of fabric, this method can be used (a) Draping (b) Grading (c) Lay-out (d) Drafting Answer in one or two words: 1. What is lay-out? 2. Name the garment for which a combination fold is used.

2. Brief out on single, ply and card yarns. 3. Explain the yarns properties. PART IV Answer in detail: 1. Explain the yarn manufacturing system. Answers for objective questions: 1. ( c) 2. (a) 3. (c) 4. (c) 5. (b) 5. FABRIC PRODUCTION 5.1 INTRODUCTION: Weaving is the name given to the interlacing of two sets of yarns, warp and weft at right angles and the fabric thus formed is woven fabric.The warp yarns are those yarns which lie in the length direction of a fabric while it is being woven.