2. Cable Stitch: This stitch is worked from left to right. Bring the thread through on the line of the design. Insert the needle a little to the line and bring the needle out to the left midway between the length of the stitch, with the thread below the needle. Work the next stitch in the same way but with the thread above the needle. Continue in this way, alternating the position of the thread. This stitch may also be worked on evenweave fabric.

8. Sewing on fabrics: Raise the presser foot and turn the flywheel so that the take-up lever is at its highest point. Pull the upper and under threads straight back under the presser foot to prevent them from becoming knotted at the beginning of the stitching line. Place the cloth to be stitched under the presser foot, with the seam allowance to the right of the needle and the Under threading rest of the material to the left. Now turn the wheel until the needle enters the fabric at the exact starting point, and then lower the presser foot. Start the machine slowly, guiding the material gently; with both your hands, and then gradually increase the speed of stitching.