18. Belt: This is usually made out of leather, but a cloth Tape, Nylon wire or any other strong rope can also be used. 8.5 OPERATING THE MACHINE: Manufacturer usually supply an instruction manual with each sewing machine they sell. It is essential to read this book carefully and follow the instructions meticulously. When you are learning to treadle, run the machine with the presser foot up and the clutch on flywheel loosened so that the needle does not go up and down. Sit at a comfortable height in front of the machine and place one foot forward and the other foot sightly back on the treadle. Start the machine by turning the flywheel towards you. As the treadle begins to move, start pedaling slowly in such a way so as to continue this motion. Continue evenly, and gradually increase the speed. To stop the machine, place your hand on the flywheel and stop the motion of the feet. Practice to run the machine smoothly at correct speeds.

7. Loop turner: This tool is a long metal rod with a hook at one end used to turn bias tubing right side out. 6.7 PRESSING TOOLS: Pressing is essential for neat sewing and also for enhancing the appearance of finished garment. Some of the pressing tools are.